Huawei U9500 ကို Official 4.1.1 ျမင္႔ျပီ Root လုပ္မယ္

DOWNLOAD===>> [You must be registered and logged in to see this link.]
username === mr.android6
password === hv($Y$yOVKTQ
ROM install :
Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step 5: SD card into the phone is switched on in the main screen, press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.
Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.
or
Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure
Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

Huawei U9500 ေလးကို 4.1.1 Update လုပ္ျပီရင္ေတာ႔ Root လုပ္ဖို႔အတြက္စလိုက္ရေအာင္
Root ဖုိင္ကို MPX ကေန ကူယူေဖာ္ျပထားပါတယ္။
လိုအပ္တဲ႔ဖိုင္ကိုအရင္ေဒါင္းပါ download>>>>https://www.dropbox.com/s/837o69j6s7d8obt/u9500%20root.rar?m
ျပီရင္ ေဒါင္းထားတဲ႔ ဖိုင္းထဲက MPX.U9500 CWM root.zip ကို Memory card ထဲကို ထည္႔ပါ ။
ျပီရင္ေတာ႔ Phone ရဲ႔ System Settings ===> USB debugging နဲ႔ Unknown Sources ကို on ထားပါ
Phone ကို Computer နဲ႔ ခ်ိတ္ပါ ေဒါင္းထားတဲ႔ CWM for U9500.bat ကို Run ပါ။
Keyboard မွ Enter ကို နိပ္ပါ ။ Reboot က်ျပီ Fastboot မွာ ရပ္ေနလိမ္႔မယ္။
Keyboard မွ Enter ကို ထပ္နိပ္ပါ recovery သြင္းေနပါျပီ ခဏေစာင္႔ျပီ Keyboard မွ Enter ကို
ထပ္နိပ္လိုက္ပါ Reboot က်ျပီ ျပန္တတ္လာရင္ Recovery ထဲေရာက္သြားလိမ္႔မယ္။
ပထမက ထည္႔ထားတဲ႔ MPX.U9500 CWM root.zip ကို recovery ကေန install လုပ္ေပးလိုက္ပါ
ျပီရင္ Reboot ခ်ေပးလိုက္ပါ။ Power ျပန္တတ္လာရင္ေတာ႔ ။Huawei U9500 4.1.1 ေလးကို
Root လို႔ျပီပါျပီေနာ္။
အားလံုးပဲအဆင္ေျပပါေစဗ်ာ။။။။။။။။။။။။။။

u9200 ကိုေရာလုပ္လို႔ရပါသလား အကို
ေက်းဇူးျပဳ၍ေျဖေပးပါေနာ္

u9200 အတြက္လဲရွိပါတယ္ official 4.1.1ေတာ့မဟုတ္ဘူးအကို root ၿပီးသား ROM ကၽြန္ေတာ္ခုသံုးေနတာ

အကုိတုိ႔ေရ G510-0010 ကုိ CWM Romတင္ခ်င္လုိ႔ပါ

Thz